Front Nissan logo

All Nissan Ariya related discussions
Post Reply
Woody
Posts: 7
Joined: Sun Jan 28, 2024 11:30 pm

Post by Woody »

Advance doesn't have the functionality, although the cable plugs into the front badge , there are no pins in the socket on the badge.
I fitted a new badge (see my post earlier in the thread) and the mod worked.

scarey
Posts: 40
Joined: Sun Apr 07, 2024 11:37 am

Post by scarey »

why would you say that the advance does not have the function Woody..are you a nissan tech or do you just 'think' you know..

mine is a feb 2023 advance and the badge/logo does have the pins in the socket.....i tapped into the ignition feed in the box shown in craigs pictures and the logo lights up..
Woody
Posts: 7
Joined: Sun Jan 28, 2024 11:30 pm

Post by Woody »

Cosmyc wrote: Sat Jun 22, 2024 4:15 am
Woody wrote: Fri Jun 21, 2024 9:30 am87kw Advance 👍
It was normal that yours didn't come with it, Advance and Engage trims in Europe doesn't have the light hardware installed in the car, only Evolve and Evolve+ trims have it.
Scarey....mine didn't have it and Cosmyc replied with the quote above.....maybe you should bother to read the full post next time....unless you are a Nissan Tech....or think you are 🤣
MettaUK
Posts: 8
Joined: Thu Jul 25, 2024 10:17 am

Post by MettaUK »

Cant find the info on how to do this on FB. Care to share?
Woody
Posts: 7
Joined: Sun Jan 28, 2024 11:30 pm

Post by Woody »

craig1527 wrote: Fri Jan 06, 2023 6:43 am hope this helps

[im3A94B08F-B4E1-411B-8DCF-4EAE5814DA8D.jpeg[/img]
Here you go
Woody
Posts: 7
Joined: Sun Jan 28, 2024 11:30 pm

Post by Woody »

That didn't work 😕
Go to page 2 of this thread,
Ariya123
Posts: 7
Joined: Tue Jul 30, 2024 8:33 am

Post by Ariya123 »

Hello, i have 2024 Ariya Evolve. Tried adding the jumper wire in the fuse box but logo did not lit. I measured +12v on one of the pins of the connector to the logo and the GND after i did the jumper. Maybe the logo has no LED inside? But still connector with black and red wire goes in it.
Cosmyc
Posts: 385
Joined: Fri Jul 08, 2022 6:08 am

Post by Cosmyc »

Ariya123 wrote: Tue Jul 30, 2024 8:37 am Hello, i have 2024 Ariya Evolve. Tried adding the jumper wire in the fuse box but logo did not lit. I measured +12v on one of the pins of the connector to the logo and the GND after i did the jumper. Maybe the logo has no LED inside? But still connector with black and red wire goes in it.
That would be a first case of an Evolve not having LEDs installed on the logo.
Ariya123
Posts: 7
Joined: Tue Jul 30, 2024 8:33 am

Post by Ariya123 »

Detached the front logo and seen no pins in the connector:

20240808_105339.jpg

The cable:

20240808_105345.jpg

In the web i found a picture of back side of the logo with pins in the connector:
https://static.mercdn.net/item/detail/o ... 1713266832
Cosmyc
Posts: 385
Joined: Fri Jul 08, 2022 6:08 am

Post by Cosmyc »

First case here confirmed then.
Post Reply